Jared - SIS-2

1. Vdd: (with respect to Vss) 2 - 5.5 V

2. Output 2: will operate according to Mode Select pin (below)

3. Output 1: will operate according to Mode Select pin

4. Vdd

5. IR in: from IR module. No signal = Vdd; Pulses = Vss

6. Learn: pulling pin LOW until pin 2 or 3 goes HIGH indicates learning mode is active for pin 2 or 3

7. Mode Select: 2 modes of normal operation

  1. Mode 1 - Mode Select pin LOW

          Output 1 will toggle each time its corresponding IR code is received

          Output 2 will toggle each time its corresponding IR code is received

     2. Mode 2 - Mode Select pin HIGH

          Output 1 is normally LOW, but goes HIGH when its corresponding IR code is received

          Output 2 is normally LOW, but goes HIGH when its corresponding IR code is received

8. Vss