Pictures and video


This is the video of the project working. I attempt to display the fact that the temperature has indeed gone up, but the camera wouldn't focus.


This picture displays the arduino and its connections.

The arduino connects with 3 objects: the computer, the servo, and the temperature sensor. The computer outputs the data onto the arduin and it then exicutes. For the interfacing with the servo, three connections are needed: ground (black), power (red), and the commands (yellow/white). For the command wire, I chose input 9.  Lastly for the temperature sensor (Temp01), three connections are also needed. One for the power and one for the ground. Also there needs to be a connection from the voltage output (bottom right) to the arduino. Here I chose A0. Remember it is of the utmost importance that there is a common ground!!